Skipper Chappell’s comments follow on the heels of a lengthy discussion on a incident at specific Waterway bridge. See /?p=120963. However, the advice offered would apply to any bridge requiring communication with a bridge master.

I do not condone any rude behavior by Bridge Tenders. I can explain a few things though. He probably turned the light off in the tender house to see you better. Also, bridges open on signal. You are required to request an opening via VHF ch9, visual signal, or horn (one prolonged blast followed by one short blast). Please read CFR33 part 117. Also, he asked for your boats name and homeport as required for filling out logs. Additionally, if he felt it was an unnecessary opening (again, see cfr33 part 117) there is a form to fill out for USCG action. Always know the height of your vessel and observe the clearance gauges. Know how to request an opening. Just because you show up at a bridge does not indicate that you request to go through. Frequently vessels approach a bridge, then turn around and go the other way, doing the tourist thing.
Dave Chappell

Dave makes some excellent points. I would add that you should use the VHF radio’“skip the other signals’“use the radio. I call even if there are other boats waiting’“I want to make sure that the bridge tender knows my intentions. Never assume the bridge tender can read your mind’“communicate!
John Kettlewell

One other point I should have made above is that 95+% of the time I have had no issues when passing through a bridge by establishing communication, following the bridge schedule and regulations, being observant of other traffic and conditions (like current and wind), and using commonsense. Yes, you do occasionally encounter a bridge operator having a bad day, but usually a calm voice, saying `please’ and `thank you,’ and using a little patience will make all good.
John Kettlewell